| MIKRA |
 |
 |
MIKRA is a gang type lathe for turning small parts, up to Ø36 mm with many front operations.
Equipped with subspindle, it is very suitable for working long parts that only need machining on the ends. Combined with Mupem CAB 5/42H CNC bar loader it can machine parts as long as the barloader is able to feed (typically up to 6 m) and it is fully capable of operating simultaneously on both sides of the part, so the cycle time is reduced by half.
It also allows maximum use of the floor area with only 2100 x 1400 mm occupied
|
| |
|
|
| Bar Passage with DIN 6343 collet (mm) | Ø16 | Ø26 | Ø36 |
| Main spindle motor | Asynchronous vectorial: 5,5 kW |
| Maximum spindle speed (RPM) | 8.500 | 6.000 | 4.500 |
|
|
|
| 2 vertical transverse slides (X axis. Z optional) |
| CNC desk (X,Z axis) |
| Synchronous CNC subspindle for second operations (optional) |
| Second operations up to 4 tools (optional) |
|
|
|
| Motorised tools on desk and second operations. |
| Stop and lock of main spindle |
| Stop and lock of subspindle |
|
|
|
| MUPEM (conversational) |
| FAGOR (ISO language - C Axis optional) |
|
|
|
