 |
 |
| OMEGA - THE NEW CONCEPT |
The OMEGA lathe was designed for filling the gap of screw cutting with a general purpose machine but with the extra ability of working simultaneously. Although it is not multislide, it is multiaxis.
It is recommended for turning parts with a lot of work on both ends, because the work can be divided between spindle and subspindle equally, although the two turrets can work simultaneously on the main spindle. It is also a machine recomended for working long parts and pipe.
Combined with the MUPEM CAB 5/42H CNC bar loader, this lathe is capable of working with parts as long as the bar loader can feed (up to 6 m).
|
| |
|
|
| Bar Passage with DIN 6343 collet (mm) | Ø30 | Ø42 | Ø60 (65) | Ø80 |
| Main spindle motor: Asynchronous vectorial: | 7,5-11 kW | 11-15 kW |
| Maximum spindle speed (RPM) | 6.000 | 4.500 | 3.000 | 2.500 |
| Maximum Turning travel | 415 mm |
|
|
|
| 2 turrets (X,Z axis) |
| 1 vertical transverse slide (X axis optional) |
| CNC Driven tools up to 5,5 kW for each turret (optional) |
| 5,5 kW Subspindle for second operations (optional) |
|
|
|
| C axis control for the main spindle and subspindle |
| Stop and lock of main spindle and subspindle |
| Polygon turning/ thread milling device on back turret |
| Automatic tailstock with Ø60 rod (replaces subspindle) |
|
|
|
| MUPEM (conversational) |
| FAGOR (ISO language - C Axis optional) |
|
|
|
